DRUCKER DIAGNOSTICS
HORIZON 24 SERVICE MANUAL
SM016
REV A
10
Fig 11
Fig 12
•
Secure the base with six #8 screws torqued to 10 in-lbs. (fig 11).
•
Install the exhaust cover and secure with three #8 screws torqued to 10 in-lbs. (fig
12).
7.11.
Power Connections and Final Assembly
•
Plug the power harness into J17
•
Plug the motor harness into J10 (Hall Sensors) and J14 (Motor power)
•
Plug the lid lock harness into J2
•
Plug the cycle counter harness into J3
•
Carefully place the cabinet onto the base taking care not to pinch any wires
between the two.
•
Complete the assembly by replacing the eight #8 screws with a 3/32 hex key.
