Copyright 2010 Baker Hughes Company.
English–PACE Indicators Instruction Manual | 21
Operation and Example Procedures
3.4.1 Measure Menu Setup
3.5 Operation and Example Procedures
3.5.1 Introduction
Before operation, the instrument must be connected to the correct electrical and
pneumatic/hydraulic) supplies. Refer to Section
When the instrument is switched ON the display shows measured pressure mode and the task
set before the power-off.
3.5.2 Measure Mode
The instrument works as a precision pressure indicator and shows the pressure measured at the
output port.
current pressure reading to zero, offset
stored for current range.
allows selection of available pressure
ranges.
Ê
-
-
select from list of available pressure
measurement units.
-
Absolute range selection available when
barometric option installed.
Ê
%
Filter pressure reading
Tare
Pressure zero
Range
Process
Task
Units
Global set-up
Status
Measure set-up
More
Next page of menu options. Loops from
last page to first page.
Stores settings and exits set-up.
see 3.6:
-
next page:
-
Exit set-up.
Peak
Summary of Contents for PACE1000
