Druck DPI 800, Instruction Manual

Page: 10 / 270

Copyright 2003 Baker Hughes Company.
6 | DPI 800/802 Instruction Manual–English
1.5 Set up the Basic Operation
Use the Set Up menu to set up the basic operation of the instrument.
If there is additional data for a menu option, select Settings (

) to see the values that are set
up. If necessary, adjust the values.
1
Menu:
Select Task
2 3
Menu:
Set Up
4 5

 

(Table 2) (Table 1) [

]/[ ]
Table 1: Menu Options - Set up
Options
(If applicable) Description
DPI 802/802P only. To add a series resistor into the mA circuit. You can then use this
instrument together with a HART® communicator to set up and calibrate HART®
devices.
To select and set up the backlight fa timer.
Additional data: Select Settings (

)
To select and set up the power off fa timer.
Additional data: Select Settings (

)
To show the battery level (%).
To set the display contrast (%).

Increases %,

decreases %
To set the time + date. The calibration facility uses the date to give service and
calibration messages.
To set the language option.
To calibrate the instrument.
Additional data: Refer to “Calibration” on page 19.
To select and show the applicable status data (Software Build, Calibration Due date,
Serial Number, IDOS Information).
MENU
OK
MENU
OK
MENU
OK