SECTION 2
LEARNING ABOUT YOUR ARMOR X7
PAGE 50
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
S urge S uppres s or
Surge protection is required for all vehicle installations of the ARMOR X7. This surge protection
is necessary to prevent damage to sensitive electrical circuits in the X7 tablet.
If the vehicle system voltage remains within the limits of 11-14 VDC, a regulated power supply is
not required and can be replaced with an industrial-grade surge suppressor (
NOTE:
If the
vehicle voltage is not controlled within these limits, a regulating power supply will be required
(see Vehicle Power Supply in this section).
DRS offers its Industrial Vehicle Surge Suppressor (IVSS) (P/N 9800F50856-0000) shown in
Figure 21. We also offer an installation kit to connect your surge suppressor to your vehicle’s
battery supply. Please contact
for information and specifications
concerning this device and the required kits and parts needed for your particular vehicle
installation.
Figure 21. Industrial Vehicle Surge Suppressor
V ehic le P ower S upply
The X7 vehicle power supply (P/N 5700-46340-0000) is a rugged Lind® power supply that
accepts 9-42 VDC input from the vehicle battery supply and provides a regulated 15.6 VDC
output at 6 amps maximum to the X7 system. This power supply is only required if the vehicle
power system voltage drops below 11 VDC or exceeds 14 VDC.
Figure 22. X7 Vehicle Power Supply
