4
4.3 END ELEMENT
The end element is used to terminate the dividers assembly. The tightening screws should be have the torque
specified when completing the assembly.
You can order the components of dividers block separately. Remember that washers and assemblies screws must
be ordered separately also.
WASHERS
SCREWS
PART
NUMBER N° elem.
PART
NUMBER N° elem.
PART
NUMBER N° elem.
PART
NUMBER N° elem.
PART
NUMBER N° elem.
PART
NUMBER
0016047
3
4
0014396
0014181
5
6
0014397
0014182
7
8
0014191
0014398
9
10
0014399
0014400
11
12
0014401
0014402
5. CYCLE CONTROL DEVICES
You can control the lubrication cycle installing a device that can be electric (Hall Effect sensor) or just a mechanical
visual sensor (with colour strip) that indicates the internal movement of the spool during the lubrication cycle. It is
recommended to install them on both master and secondary dividers on the secondary master in order to have
rapid feedback of any blockages or failures in the lubrication system and for ease of troubleshooting.
A)
The Ultrasensor can be directly assembled on any divider without special arrangements
.
ELECTRICAL CHARACTERISTICS
Max output power
2A – NPN
0,7A – PNP
Power supply
8 ÷ 28 VDC
Contact
NPN (NO)
PNP (NO)
B)
Visual monitoring pin with colour strip. This must be ordered with the divider element.
DIVIDER
with colour strip
visual
indicator
Q. cm³
PAR NUMBER
DESCRIPTION
0,025
0645778
VISUAL INDICATOR nP 025 "nano Progressive"
0,045
0645779
VISUAL INDICATOR nP 045 "nano Progressive"
0,075
0645780
VISUAL INDICATOR nP 075 "nano Progressive"
0,105
0645781
VISUAL INDICATOR nP 105 "nano Progressive"
PART NUMBER DESCRIPTION
0645749
END nP "nano Progressive"
“ULTRASENSOR”
PART NUMBER
1655308
14Nm
1655308
11Nm
