DROPSA nano Progressive, User Operation And Maintenance Manual

Page: 3 / 9

3
4.2 METERING ELEMENT
Metering elements are available with 4 different flow rates. Each nP- Nano Progressive can be assembled with a minimum
of 3 elements and maximum of 12.
Q. cm³
PART
NUMBER
DESCRIPTION
0,025 0645750 nP 025-DIVIDERS "nano Progressive"
0,045 0645751 nP 045- DIVIDERS "nano Progressive"
0,075 0645752 nP 075- DIVIDERS "nano Progressive"
0,105 0645753 nP 105- DIVIDERS "nano Progressive"
It's possible to combine the outlets into a single outlet by element replacing the yellow adaptor (Part number
0641791) with the white one as shown in the drawing below.
When two outputs are ported internally. Remember to plug the unused port (Part number 3232098).
It is also possible to combine the flow rates of a metering element with the next metering element in the assembly
by selecting an appropriate bridge metering element.
BRIDGE ELEMENT (The output flow rate is ‘bridged’ to next metering element as indicated by arrow)
LEFT RIGHT LEFT / RIGHT
CODE PART NUMBER CODE PART NUMBER CODE PART NUMBER
nP 025 L 0645754 nP 025 R 0645758 nP 025 LR 0645762
nP 045 L 0645755 nP 045 R 0645759 nP 045 LR 0645763
nP 075 L 0645756 nP 075 R 0645760 nP 075 LR 0645764
nP 105 L 0645757 nP 105 R 0645761 nP 105 LR 0645765
Each metering device is identified with appropriate marking that shows the output per cycle, for example: “nP 075”
corresponds to 0.075 cm³ output per cycle per outlet.
In the case of a bridge element, the bridging function is also indicated of outputs: “L” left bridge, “R” right bridge,
“LR” left and right bridge.
10Nm 10Nm
0641709 0641791 0641708 3232098
10Nm