DROPSA MiQueL, User Operating And Maintenance Manual

Page: 3 / 12

3
3. PRODUCT IDENTIFICATION
There is a plate on the side of the unit that displays the product code, the power supply voltages and the basic
characteristics.
4. TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Reservoir capacity 1lt – 3lt
Maximum number of modules
8
Air inlet pressure
4bar ÷ 7bar
Maximum air consumption at the outlet
~50Nl/min (per module)
Air inlet pipe
Ø10mm
Air outlet pipe
Ø6mm
Oil outlet pipe
Ø3mm
Oil flow rate per element
PRO
0.1 ÷ 2.7 cc/min (oil 10cSt)
0 ÷ 1 cc/min (oil 32cSt)
0 ÷ 0.2 cc/min (oil 100cSt)
BASE
0.3 ÷ 8 cc/min (oil 10cSt)
0.1 ÷ 3 cc/min (oil 32cSt)
0 ÷ 0.6 cc/min (oil 100cSt)
CART
cc/min = (P x 8.16)/V
P = Operating pressure in [bar]
V = viscosity [Engler] at operating temperature
Lubricating oil
10cSt ÷ 100cSt
Protection grade of module
“
-
i
”
Standard
IP 00
On request (special)
IP 65
Protection grade of reservoir
IP 65
Pressure switch calibration (optional)
6bar
Maximum pressure switch load (optional)
Voltage free contact maximum voltage 250V
Maximum power 100W
Maximum minimum level load
0.2A @ 30V
Element solenoid valve power supply
24Vdc
Operating temperature +5°C ÷ +50°C
Storage temperature
-10°C ÷ +80°C
Max. relative humidity without operating condensate
90%
Sound pressure level < 70 dB(A)
Net weight
~5Kg (mod. 1lt) – ~7Kg (mod. 3lt)
5. COMPONENTS
MODULAR ELEMENT
Solenoid valve
(“-
i
” version only)
Pressure gauge
(optional)
Push-in pipe Ø6 air
outlet
Air regulation
Oil regulation
( NO “CART”
version )
Compensation valve
(“PRO” version only
)
Push-in pipe Ø3 oil
outlet