14
13. Handling and Transport
Before shipment, the pumps are carefully packed inside a cardboard box. During transport and
storage of the equipment, pay attention to the direction indicated on the box. Upon receipt, check
that the packaging is not damaged and store the pump in a dry place.
14. Precautions for Use
Flammability
The lubricant generally used in the lubrication circuits is not inflammable fluid. However, it is
imperative to take all necessary steps to prevent it from coming into contact with very hot
parts or naked flames.
VALVE
Before any operation, check for the absence of any residual pressure in all branches of the
lubricant circuit, that could cause spurts of oil in the event that fittings or components are
disassembled.
Noise
The equipment does not emit noise exceeding 70 dB (A).
ATTENTION: The warnings on risks using a lubricant pump implies must be carefully read. The user
must be familiar with operation through the Operation and Maintenance Manual.
14.1. Lubricants
A table is shown that compares the NLGI (National Lubricating Grease
Institute) and ASTM (American Society for Testing and Materials)
categories for greases, limitedly to the values that involve the
OmegaPUMP pump.
For further information on the technical characteristics and the safety measures to adopt, see the
Product Safety Data Sheet (Directive 93/112/EEC) related to the type of lubricant selected and
supplied by the manufacturer.
NOTE: The pump is designed to work with maximum NLGI 2 grade lubricants. Use NBR gasket compatible
lubricants. Any residual lubricant inside that was used for assembly and testing is NLGI 2 grade.
NLGI
ASTM
000
445 - 475
00
400 – 430
0
355 – 385
1
310 – 340
2
265 – 295
