Phase 2. Installation of the stove’s hoses
Before you connect the stove to the hoses, twist the clamps at the ends of the hoses to
open them a little and then firmly push the hoses on the pipes at the back of the stove.
You can use liquid soap or some other lubricant to connect the hoses without the use
of excessive force. After this, you can tighten the pipes around the stove’s return and
outgoing connections. To ensure the tightness of the hoses, we recommend using, for
example, duct tape for the installation.
TIP! When attaching the hose, you can heat it with a hot-air gun or a hairdryer which
will make it easier to tighten the paper clips and bend the hose. A heated, softer hose will
also settle better in the connection and become tight at once.
n the picture on the right, the stove package’s return/lead-in have been marked on the
pool’s vertical wall. It is recommended to place the stove no more than one metre from it.
D R O P P I S A R A
