Drone Sky Hook DSH-DRD1-P3, Installation And Operation Manual

Page: 3 / 28

www.droneskyhook.com
Page 3 of 28
Overview
Overview of the Drone-Sky-Hook Release & Drop Device for DJI Phantom 4 and
Phantom 3
Revolutionary innovative design that perfectly fits your DJI Phantom 4 and Phantom 3 series drones and allows for
standard storage while installed.
Simultaneously transport two payloads (Dual models only) or one payload and then release & drop them, one at a time,
above specific target areas.
Remote controlled AUX Channel controls your third-party devices by switching them ON or OFF during your flight (PLUS
models only).
Combine this device (PLUS models only) with the optional
Drone-Sky-Hook LED Searchlight with Built-In Laser
Pointer
(sold separately) to shine bright light at night on objects as far as 330 feet (100 Meters) away or use the built-in
Laser Pointer to mark and illuminate points of interest on the ground.
Multiple Release & Drop modes and separate ON/OFF Control modes to best suit your application:

Simple drone rotation (Self-contained. No linkage to the drone’s front LED light is required).

Use of C1 or C2 button on the DJI drone remote controller or DJI App (Linkage to the drone’s front LED light is
provided).

Manual control.
Connect-And-Fly in seconds! No modification of any kind to the drone is required! No tools needed!
Quick Mounting and Locking Systems (QMLS). Perfectly fit the DJI Phantom 4 and Phantom 3 series drones.
Sensors Interference Avoidance System (SIAS). Will not interfere with the operation of the DJI Phantom 4 or Phantom 3
VPS sensors.
Unlimited operation range.
Small and light weight. Weighs only 1.75 oz ( 49 grams). Allows you to lift maximum payloads.
Quick and easy to operate. One hand payload hookup.
Over 200 carry & drop operations on a single battery charge.
Remaining Battery Capacity indicator light allows you to fly with confidence.
Built-in rechargeable battery and USB Charger. Can be charged from any 5V/1A mobile phone charger or USB jack on
computers/Laptops.
Robust design. High quality 3D printed lightweight ABS.
Note: Do not overload your drone with heavy or bulky payloads that it cannot safely carry.