Installation Of Your Drolet Woodstove
Positioning The Stove
It is very important to position the woodstove as close as possible to the chimney, and in
an area that will favor the most efficient heat distribution possible throughout the house.
The stove must therefore be installed in the room where the most time is spent, and in the
most spacious room possible. Remember: woodstoves produce radiating heat, the heat
we feel when we are close to a woodstove. A woodstove also functions by convection,
that is through the displacement of hot air accelerated upwards and its replacement with
cooler air. If necessary, the hot air distribution from the stove may be facilitated by a
blower or the installation of floor or wall grills.
Important
: A woodstove must never be installed in a hallway or near a staircase,
since it may block the way in case of fire or fail to respect required
clearance.
The woodstove must not be hooked up to a hot air distribution system
since an excessive accumulation of heat may occur.
Floor Protection
Your woodstove should be placed on a non-combustible surface. Having these minimum
specifications.
Thickness
of sheet
Front
Protrusion
Side
Protrusions
Rear
Protrusion
1/4" (6 mm)
18" (457 mm)
6" (150 mm)
6" (150 mm)
Clearances
It is of outmost importance that the clearances to combustible material mentioned on your
woodstove certification plate be scrupulously respected upon installation.
Back wall
Side wall
Corners
*Height
16" (406 mm)
16" (406 mm)
16" (406 mm)
7' (2,3 m)
* Height, from bottom of the stove to the ceiling.
5
Summary of Contents for R.C. WOODSTOVE
Page 4: ...Your Drolet Stove Assembly 3...