Page 11 of 15
TURNING THE APPLIANCE OFF
•
Set the flow regulating handle to position 0.
•
If you plan to keep the appliance off for a long while, it is recommended to disarm the valve’s lever and
close the tap on the pipe between the appliance and your oil tank.
ALWAYS KEEP THE VALVE SHUT OFF WHEN THE BURNER IS NOT OPERATING
MAINTENANCE
ONCE A WEEK :
•
Clean the oil inlet tube of the burner with the
cleaning tee :
Push in the rod of the cleaning tee while
turning it
Move back and forth operation 2 or 3 times;
Pull it back into place to finish the operation.
Figure 15 : CLEANING TEE
WHEN YOUR APPLIANCE IS RUNNING, ALWAYS KEEP THE CLEANING TEE LEVER PULLED BACK
INTO PLACE.
ONCE A MONTH OR TWO :
•
Clean with a metallic brush;
•
The burner’s shell;
•
The burner’s rings;
•
The burner’s catalyst (in blue flame model).
AT THE BEGINNING OF EACH HEATING SEASON :
•
Clean the valve and tank filters;
•
Inspect the smoke box through the opening of the rear flue outlet.;
•
Clean the chimney and flue pipe.
MAKE SURE THAT ALL HAND VALVES ARE CLOSED BEFORE CLEANING PROCEDURES.
WHEN NEEDED :
•
Clean the door glasses.
•
Always clean the glasses when the appliance is cold. Use commercial product for this purpose, or a water
and vinegar solution.
