2
Functions
Items
Functions
DC Input
DC 5V, to charge product by the port
Reset/Ethernet SW
Press and hold for 2 - 4 seconds to turn the Ether-
net function off. If held for more than 8 seconds,
it will revert to the factory default settings.
Note: If you are not using the Ethernet function,
turning it off will save 20% capacity.
3G/DHCP Switch
Switch the connection status between 3G and
DHCP. (If reading Micro SD, switch to DHCP. If
inserting an external 3G/4G USB modem or ETH
cable, switch to 3G).
3G/DHCP
Switch
DC Input
Reset/ETH Switch
Items
Functions
Capacity Indicator
To check remaining power, press and hold the button
for 2 seconds until the LED light turns on. After 3
seconds the light will turn off automatically to save
power.
USB Charge Port
5V, 1-3A adaptive output, suitable for charging smart-
phones, MID and PSP etc.
WAN/LAN
For 10/100M RJ45, WAN/LAN options.
3G/4G USB Port
To connect a 3G/4G modem.
Power on/c/off
To turn the Voyager on and off. (Switch to “ON”, for
USB modem, ETH, Micro SD, USB drive; or switch to
“C” to use the charging function).
Power Check
USB Charge
WAN/LAN
3G Port
ON/OFF