This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that may not be
reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2015) Drivecon. All rights reserved.
(5)
MAINTENANCE
Use the stop button to start and turn off the transmitter as often as possible.
When error messages are shown, it is very important to find out what caused them.
If the stop button is mechanically damaged, contact your representative for service immediately.
Always contact your representative for service and maintenance work on the product.
Write down the serial numbers of the receivers and transmitters used. This information should be recorded
on the “Settings document” for your product (download from our website).
Avoid registering transmitters to receivers where it is not being used.
Keep the safety instruction for future reference. Always download the configurations instruction from our
web site for the latest version available
