set up instructions
1.
Remove Safety Roller from carton.
2. Unfold Safety Roller by lifting ring from left upright and
open frame. Lift handlebar and position over left upright.
Make sure spring button snaps into hole on the
handlebar underside.
height adjustments
Recommended handlebar height is at the wrist with arms fully
extended. With your hand placed on the hand grip, your elbow
should be flexed 20° - 30°.
1.
Open both height adjustment knobs.
2. Push in spring button, one side at a time and raise
or lower uprights to desired height.
3. Tighten knobs.
folding instructions
1.
Press spring button on left side of handlebar and lift
handlebar.
2. Hold handlebar in right hand and with left hand, swing
left upright outward and squeeze into Z position until
fully folded.
3. Drop handlebar over folded Safety Roller.
4. Secure both the uprights by putting the ring over the left
upright and under the spring button.
accessories
Adjustable forearm platforms, vertical hand grips, variable
resistance tabs on rear wheels, swivel wheel locking brackets,
seat harness, ankle prompts, posterior positioning bar, pelvic
stabilizer,trunk support, extended uprights for additional
height, IV pole and oxygen tank holder.
Call an authorized Drive dealer for detailed information about
our accessories.
figure 1
Item # PE 1200 Shown
Spring Button
Comfort
Grips
Ring
Height
Adjustment
Knobs
Spring
Button
figure 2
(folded position)
