Secure the armrests in place with the provided
star knobs at the desired width.
Set the battery pack onto the scooter directly in
front of the seat post. Lock the battery pack in
place by rotating the dial on the pack to the
locked position.
Remove your scooter from its packaging.
Loosen the tiller adjustment knob, raise the tiller
to the desired angle and retighten the knob.
Attach the front basket by aligning the bracket
on the tiller with the mounting holes on the
basket. Then push down to secure in place.
Fully charge the scooter’s batteries by inserting
the round charger connector into either the
charging terminal on the scooter’s battery pack or
the terminal located on the scooter’s tiller. Then insert
the 3-pronged plug into a standard electrical outlet.
Be sure to charge the scooter for 8-10 hours before
first time use.
1.
2.
3.
4.
5.
6.
7.
8.
Quick Start Guide
Phoenix HD 3 & 4 Wheel
Please Read Before Operating!
For technical assistance, call toll free (866) 621-4933 or (800) 544-5155.
Insert the armrests into the attachement points
in the seat frame so that the armrests face
forward.
While lifting up on the seat release lever, place
the seat onto the seat post. Release the lever
and rotate the seat until it locks into place.
Remove the clear plastic insert from the area
where the battery pack connects on the front
shroud.
