Your Phoenix HD Scooter is designed to be easily disassembled into 5 pieces
for convenient transport or storage.
The pieces are:
•
Front Section (heaviest piece, 40 lbs.)
•
Rear Section
•
Battery Pack
•
Seat
•
Front Basket
To disassemble your scooter:
1. Turn key switch to “OFF.”
2. Engage front wheel lock.
3. Place the freewheel mode lever in the “Drive” position.
4. Pull
upward on the
swivel-release lever to remove the seat from seat post.
5. Pull up on the battery pack to remove it from the scooter.
6. Pull up on the release lever to separate the front and rear sections.
Phoenix HD Quick Start Guide
READ BEFORE UNPACKING
This Quick Start Guide offers basic information on initial product
setup only. Read the owner’s manual and all supplemental
information thoroughly before operating the product for
information on safety, battery charging, basic operation, comfort
adjustments, disassembly and care and maintenance.
NOTE: The illustrations provided may not reflect your actual unit.
Before use, make sure that the scooter’s
freewheel mode knob is pushed down in the
“drive” position.
READ
THIS
FIRST!
9.
For information on the
comfort adjustments available
on your scooter, please
consult your owner’s manual.
