Drive DeVilbiss Healthcare Theia Instructions For Use Manual Download Page 28

28

14. WARRANTY

Drive DeVilbiss Healthcare Ltd. warrants that this product will perform in accordance 

with its specification and will remain free from defects in material and workmanship 

when used under normal conditions for a period of 1 year (which specifically is - 1 year 

full parts and labour) from the date of purchase from Drive DeVilbiss Healthcare Ltd. 

and its subsidiary companies. If purchased from an authorised dealer or international 

distributor, the product is warranted for 1 year parts only. 
DRIVE DEVILBISS HEALTHCARE LTD. MAKES NO OTHER WARRANTIES, EXPRESS OR 

IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT 

AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT 

WILL DRIVE DEVILBISS HEALTHCARE LTD. BE LIABLE FOR PUNITIVE, SPECIAL OR 

CONSEQUENTIAL DAMAGES, OR FOR AN AMOUNT IN EXCESS OF THE PURCHASE 

PRICE OF THE DEFECTIVE DRIVE DEVILBISS HEALTHCARE LTD. PRODUCT OR 

PRODUCTS.
Proof of purchase must be presented with any claim. Except as provided herein, this 

warranty will not apply to any Drive DeVilbiss Healthcare Ltd. products that have been 

(a) damaged by lightning, water, or power surges, (b) neglected, altered, abused, or used 

for a purpose other than the purpose for which they were designed, (c) repaired by you 

or any other party without Drive DeVilbiss Healthcare Ltd. prior written authorisation, 

(d) used in conjunction with a third party product or products not approved in advance 

by Drive DeVilbiss Healthcare Ltd., (e) damaged or failed by or attributes to acts of God, 

(f) damaged, caused by failure to follow instructions,or (g) otherwise used in a manner 

inconsistent with any instructions provided by Drive DeVilbiss Healthcare Ltd. The 

warranty explicitly exempts consumable items.
This warranty contains the entire agreement between you and Drive DeVilbiss Healthcare 

Ltd. with respect to any warranty matters, and supersedes any and all other written or 

oral statements, representations or agreements relating to the subject matter of this 

warranty.
In the event of a product defect during the warranty period you should contact your 

supplier, whether it be Drive DeVilbiss Healthcare Ltd., its subsidiary companies, 

authorised dealers or international distributors who will at their option unless otherwise 

provided by law; a) correct the defect by product repair within the terms of the warranty b) 

replace the product with one of the same or similar design or c) refund the purchase price. 

All replaced parts and products on which a refund is made become the property of Drive 

DeVilbiss Healthcare Ltd. Repaired or replaced parts and products are warranted for the 

remainder of the original warranty period. You will be charged for repair or replacement 

of the product made after the expiration of the warranty period.
This limited 1 year warranty gives you specific legal rights and you may also have other 

rights. 
Drive DeVilbiss Healthcare Ltd. cannot be held responsible for any injury or incident 

which relates to the use of this bed in conjunction with accessories manufactured by 

companies other than Drive DeVilbiss Healthcare Ltd.
Drive DeVilbiss Healthcare Ltd. has a policy of continual product improvement and 

reserves the right to amend specifications covered in this document. No part of this 

document may be reproduced without the written approval of Drive DeVilbiss Healthcare 

Ltd.

Summary of Contents for DeVilbiss Healthcare Theia































Reviews: