14
–
Hybrid-Power
Troubleshooting
Problem
Solution
No power to the unit
x
Ensure the pump is switched on at the side of the pump and not
on standby
x
Ensure the mains lead is connected to the mains and also the
pump
x
Ensure there are no blown fuses in the pump or mains lead.
Replace accordingly
Low pressure indicator is
lit
x
Ensure the correct comfort setting has been selected
x
Ensure the connections between the feed pipeand the pump unit
are secured
x
Ensure all tubing connections along the cells are secure
x
Assess the cells for any punctures which maybe causing a leak
Patient is bottoming out
x
Pressure setting may be inadequate, adjust comfort range
No air is being produced
from some of the air
outlets of the tube
connectors
x
This is normal in alternating mode. Air outlets take turns to
produce air during their cycle time
x
If fault still continues, a Drive DeVilbiss Healthcare approved
engineer will be required to repair the fault
Pump is noisy
x
Tightly secure the bed hooks to the bed frame as this will reduce
vibration and limit noise
x
Ensure pipe work is not kinked
x
If fault still continues, a Drive DeVilbiss Healthcare approved
engineer will be required to repair the fault.
Summary of Contents for DeVilbiss Healthcare Hybrid-Power
Page 1: ...Hybrid Power User Manual...
