installation instructions
1. Remove Toilet Seat from carton.
2. Turn Clamp locks counter-clock wise to loosen clamp.
3. Position each clamp (A) over the toilet bowl until it
rests securely on the bowl. (There is a second
adjustment on the aluminum housing (B) that the
clamp is attached to. To adjust, turn the entire clamp
counter-clock wise until removed. There are 2 width
adjustment holes for the clamp to fit in. Adjust as
necessary).
NOTE: The black locks should be facing outward
from the bowl.
4. Once the toilet seat is set on the bowl, tighten the
black clamp lock clockwise until secure. Repeat on
each clamp until all clamps are tight.
5. To remove toilet seat, reverse procedure and lift from
bowl.
A
B
cleaning instructions
1. Use a non-abrasive mild detergent or household
cleaner with warm water.
2. Rinse seat with warm water and wipe dry.
3. DO NOT USE AN ABRASIVE CLEANER OR CLOTH
with this product, as damage may ensue.
caution
1. Always be sure that the seat is correctly and securely
locked in place before using.
2. Be sure that the clamps are tight at all times, thus
securing the seat to the toilet bowl.
3. Physically challenged users should be supervised or
assisted whenever using this product.
