Sport Rider Owner’s Handbook
Part Code SR001 (Page 8)
FUNCTIONS EXPLAINED
BAR SPD: This shows the current speed (bar graph)
SPD: This shows the current speed (as a numerical value)
MAX: This shows the maximum speed achieved since the panel was last reset.
TRIP: Shows the distance travelled since the since the panel was last reset.
ODO: Shows the distance travelled by the scooter in total (cannot be reset)
RT: Shows the time the scooter has been ridden for since the last reset.
4.2 INSTRUMENT PANEL (VOLTAGE)
1.
Voltmeter (bar graph)
2.
Voltmeter (numerical)
3.
Time and other function Display
4.
Fault indicator LED
5.
Headlight LED
6.
MODE button
7.
RESET button
1
2
4
7
3
5
6
TO SET THE TIME:
1.
Press both the MODE and RESET button simultaneously to enter the time setting mode.
2.
Press the MODE button to cycle through the AM/PM, hours, minutes and seconds function
3.
Press the RESET button to alter the time settings.
4.
Press the RESET button for 2 seconds to set the time and exit the setting mode.
4.3 HOW TO OPERATE THE SCOOTER
Key Ignition:
To start the scooter, insert the key and turn the key 90º away from you.
To switch off the scooter, turn the key 90º towards you and remove the key. The key can only be
removed once the scooter has been switched off.
Operating the Throttle
The throttle lever is located on the right side of the handlebars. Squeeze the lever to operate. The
more that you squeeze the lever, the faster the scooter will travel. Release the lever and the scooter
will automatically stop.
