S8 Aviator
Owner’s Handbook
Page 8
The scooter should always be set in the low
speed setting unless the scooter is being
used on the road.
(e)
Power Indicator
The remaining power in the battery is
shown by the display status below:
100% (6 bars lit)
85% (5 bars lit)
70% (4 bars lit)
55% (3 bars lit)
40% (2 bars lit)
30% (1 bars lit)
Once the power level drops below 30%,
the gauge will flash and the warning sound
will beep at 5 second intervals, informing
the user to recharge the batteries as soon
as possible.
(f)
Clock
1.
Press the MODE button until the clock
is shown on the display.
2.
Hold down the MODE and SET buttons
until the clock starts flashing.
3.
Then press the MODE button until the
hour is flashing.
4.
Then press SET to change until the
hour is at the required setting
5.
Press the MODE button again so the
minutes are flashing
6.
Press the SET to change until the hour
is at the required setting
7.
Hold down the MODE and SET buttons
for 2 seconds.
(g)
Odometer
To see the total mileage of the scooter,
press the mode button until the ODO
function is lit on the display, and the total
mileage shown.
(h)
Trip Counter
Press the mode button until the TRIP
function is lit on the display, and the total
mileage shown. To reset the trip counter,
hold shown MODE and SET for 2 seconds.
(i)
Headlight
Press the HEADLIGHT button to switch on
the headlight. Press the button again to
switch off the headlight.
(j)
Side Lights
Press the SIDE LIGHT button to switch on
the headlight. Press the button again to
switch off the headlight.
(k)
Indicators
Press the RIGHT INDICATOR or LEFT
INDICATOR button to operate the
indicator, which will flash and a buzzer will
sound. Press the button again to stop the
indicator.
(l)
Hazard Warning Light
Press the HAZARD button to operate the
hazard warning light, which will flash and a
buzzer will sound. Press the button again to
stop the lights.
(m)
Temperature
The temperature gauge will show the
ambient temperature in ºC or ºF
