5
Using the AC adapter:
1. Remove the battery-pack if attached. With the unit on its side and the Open/Lock
button facing up, press and hold the Open/Lock button and slide the battery
toward you to disengage. Release the Open/Lock button.
2. Replace with the rubber skid resistant base. Be sure to line up the AC port and
the space on the rubber skid resistant base.
3. Insert the adapter plug into the unit’s AC port.
4. Plug the adapter into a standard AC outlet.
5. Press power switch to begin your prescribed treatment.
1. First, remove the skid resistant rubber base.
2. Install the battery pack to the bottom of the unit. With the unit on its side and
the Open/Lock button facing up, press and hold the Open/Lock button and
slide the battery away from you to engage. Release the Open/Lock button.
3. Place the rubber skid resistant base into your carry case for storage and later
use.
4. Press power switch to begin your prescribed treatment.
Note
:
A red battery light shows that the battery is being charged. If the light
changes from red to green during charging, it indicates the battery is fully
charged. Once the battery is fully charged, unplug the adapter from the
battery.
Using the battery pack:
Your Portable Compressor Nebulizer can operate with the use of a rechargeable
battery when AC power is not available. The life of the battery is approximately 2
years. However, battery life will vary depending on usage, storage, and charging
conditions.
Charging the battery pack:
To charge the battery, plug the adapter into the AC Port on the Battery.
Charging Time:
2 - 4 Hours
