Place cone inside
and fill medication.
4. OPERATING YOUR NEBULIZER
4
Operating Cautions:
Storage Cautions:
Cleaning Cautions:
1.
1.
Note:
Prior to initial operation, the nebulizer should be thoroughly cleaned.
Only connect this product to an appropriate voltage outlet for your model.
2. Do not run this product unattended.
3. Never operate the Airial Voyager™ Portable Nebulizer if it has a damaged
cord, plug, or battery or if it has been dropped into water. If for any reason
this unit does not work properly, promptly return it to an authorized service
center for repair.
4. If any abnormalities occur, discontinue use immediately until the unit has
been examined and repaired.
5. Always unplug the product immediately after use.
6. Never block the air openings of the main unit or place it where the air
openings may be obstructed.
7. This product should always be operated under close adult supervision.
Do not store the unit under direct sunlight, high temperature or humidity.
2. Keep the unit out of reach of small children.
3. Always keep the unit unplugged while not in use.
1. Do not immerse the unit in water. It may damage the unit.
1. Place your Airial Voyager™ Portable Nebulizer on a flat and stable surface. Be
sure that you can easily reach the controls when you are seated.
2. Gently twist the top part of the nebulizer cup counter-clockwise to disassemble
the nebulizer cup.
3. Fill the bottom section of the nebulizer
cup with the medication prescribed by
your physician. Be sure that the cone is
put inside the bottom section.
4. Gently twist the top part clockwise to
reassemble the nebulizer cup. Be sure
the two sections fit well.
5. Attach one end of air tube to the base of the nebulizer cup.
6. Attach mouthpiece or mask per your choice to the top section of nebulizer cup.
7. Your nebulizer operates by using one of two power choices: the AC Adapter
or the Battery pack.
2. Disconnect the unit from the electrical outlet before cleaning.
3. Clean all necessary parts after each use as instructed in this guidebook.
