PICTURE B:
Battery box
Control box with
internal charger
Emergency stop button
LCD display
Insert the plug of
power cord in control
box and the other end
to a wall outlet.
Connect the plug of
Handset
Connect the plug
of Actuator
.
Maintenance:
It is extremely important that the lift be inspected before each use. The following items
need to be checked:
a. All nuts and bolts should be tight.
b. The lifter should move freely with caster brakes off.
c. Check the brakes on the rear casters for proper operation.
d. Make sure base adjustment mechanism is operating easily.
e. Double check to ensure the “U” bracket at the end of the boom and the “S” hook on the
hanging bar are secured tightly.
f. Work the Linak Actuator to ensure that the battery still has enough power. When battery
is 50% below full capacity, it will give “ beep” warning and need to re-charge immediately.
g. Before initial use, place a drop of oil on the following areas.
(1) Where mast and boom connect, hanging bar hook, pump handle hinge, and caster
axles,
(2) Where pump and boom attach,
(3) Lubricate as above every two to three months.
* We reserves the right to make technical changes without notice
Manufactured For:
Drive Medical Design an
www.drivemedical.com
d Manufacturing
