Instructions for use DINO
9
Drive Medical GmbH & Co. KG | As per: 18.06.2020 | Errors and alterations excepted
EN
Height adjustment of the feet
Before using the product,
adjust it to the desired
height (pic. 1). To adjust the
height of the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the but-
ton clicks into place in the
desired position (2). En-
sure that the pushbutton
has correctly clicked into
place.
Ensure that all four legs are adjusted to the same height.
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
1
Technical data
Produkt
Article number
550500100
Max. load
130 kg
Diameter of seat surface
32 cm
Overall height
52 cm
Overall width
45 cm
Total height of seat surface
2,7 cm
Height adjustment (8 steps)
34 - 52 cm
Total weight
1,6 kg
Leg material
Aluminium anodised
Clip closure material
Brass
Seat material
PP (polypropylene)
