11
10
If you live in a humid environment and have problems with mold or algae
(the parts may feel “slimy”), simply soak all of the plastic parts (excluding
the pump) in a diluted bleach solution for about 10 minutes after regular
cleaning. We recommend using a solution that is 10% bleach and 90%
water. Pour some of the bleach solution down into the pump’s cavity as
well. You must be sure to rinse all the parts very thoroughly to remove all
the chlorine. The best way to rinse out the pump’s cavity is to hold it under
a weak stream of warm water. This is also an excellent way to disinfect
the fountain.
If you have “hard water” where you live, you may start to see white mineral
deposits on or down inside the pump. This may eventually prevent the
impeller from turning properly. To avoid having to replace the pump:
A. Clean the pump more frequently; or
B. Clean with regular white vinegar and let the vinegar soak for
several minutes down inside the pump’s cavity; or
C. Use bottled water.
FOUNTAIN & YOUR ENVIRONMENT
MANUFACTURER’S SAFETY
INSTRUCTIONS
The electrical use of this appliance
is 3 watts.
Close supervision is necessary when
any appliance is used by or near
children.
Always unplug any appliance when
not in use, before putting on or taking
off parts, and before cleaning. Never
yank on a cord to remove from the
outlet.
Do not use appliance for anything
other than intended use. The use of
attachments not recommended or
sold by the manufacturer may cause
an unsafe condition. Do not modify
the unit.
Do not install or store appliance
where it will be exposed to weather or
temperatures below freezing.
Read and observe all important
notices on the appliance.
Do not attempt repairs on the pump
yourself.
If the plug of this device gets wet,
turn off the electricity to that outlet.
Do not attempt to unplug.
To avoid the possibility of the plug or
outlet getting wet, the outlet should
always be above the level of the
fountain.
Examine this appliance after
installation. Do not plug in if there
is water on the cord or plug.
Do not operate any appliance if it
has a damaged cord or plug, or
if it is malfunctioning or has been
damaged.
If an extension cord is necessary,
a cord with a proper rating should
be used.
FOR INDOOR USE ONLY!
1) The fountain is meant to run continuously (always plugged into electricity),
as long as the water level is maintained and the fountain is cleaned
regularly. Be sure to check the fountain regularly to help prevent damage
to the pump, as the water may get consumed or evaporate causing the
pump to run dry.
2) Do not allow pets or children to chew on or swallow any parts. If you are
concerned about the power cord, purchase a cord conduit (a hard plastic
protector) at any hardware store.
3) Some animals have been known to be sensitive to plastic. If your animal
shows signs of an allergic reaction to the plastic, please discontinue use
until you have consulted with your veterinarian.
4)
Standard Safety Precautions:
When being introduced to the Drinkwell
®
Pet Fountain, your pet may
be cautious of this new and unusual object. After beginning operation
of your fountain, simply allow your pet to adjust at his or her own pace.
Some pets may take several days or longer to begin use.
Your pet may prefer that the fountain be placed away from their normal
feeding area. Try plugging it in somewhere else, like a laundry room, a
bathroom or another corner of the kitchen.
Add ice cubes to the bowl for refreshing, ice-cold running water!
TIPS ON USE
