Page 10
SKU 91396
for technical questions, please call 1-800-444-3353.
While charging, the Battery (11A), Battery Charger (24A), and AC/DC Adapter
6.
(25A) may become warm to the touch. This is normal, and does not indicate a
problem.
(see figure d.)
Once the Battery (11A) is fully charged, disconnect the Battery Charger (24A)
7.
2-Prong Plug
from the electrical outlet. Next, disconnect the AC/DC Adapter
(25A)
Cord
from the Battery Charger. Then, remove the Battery (11A) from the
Battery Charger.
(see figure d.)
to operate the drill:
Warning!
Always make sure the Trigger (18A) of the Cordless Drill is in its
“off”
position, the Battery (11A) is removed from the Drill, and the Battery Charger
(24A) is unplugged from its electrical outlet prior to making any adjustments to
the tool.
(see figure e.)
torQue setting ring
(26a)
chuck
(5a)
chuck
sleeve
BatterY
(11a)
rotation Button
(13a)
trigger
(18a)
figure e
1.
the chuck (5a):
Accepts up to 3/8” diameter Drill Bits, Driver Bits, and a Hex
Driver Extension. To install a Drill/Driver Bit or Driver Extension, hold the Chuck
Sleeve
firmly in place and turn the Chuck
counterclockwise
. Insert the shank of
a Drill/Driver Bit or Driver Extension all the way into the Chuck. While holding
the Chuck Sleeve in place, turn the Chuck
clockwise
to lock the Drill/Driver Bit or
Extension in place.
(see figure e.)
