12.
Avoid accidental starting.
Be sure the Trigger is off before plugging
in.
Carrying power tools with your finger on the Trigger, or adding a battery
with the Trigger depressed, invites accidents.
13.
Remove adjusting keys or wrenches before turning the power tool on.
A
wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.
14.
Do not overreach. Keep proper footing and balance at all times.
Proper
footing and balance enables better control of the power tool in unexpected
situations.
15.
Use safety equipment. Always wear eye protection.
Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
TOOL USE AND CARE
16.
Use clamps (not included) or other practical ways to secure and support
the workpiece to a stable platform.
Holding the work by hand or against your
body is unstable and may lead to loss of control.
17.
Do not force the tool. Use the correct tool for your application.
The correct
tool will do the job better and safer at the rate for which it is designed.
18.
Do not use the power tool if the Trigger does not turn it on or off.
Any tool that cannot be controlled with the Trigger is dangerous and must
be replaced.
19.
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing batteries, or storing the Charger.
20.
Store idle tools out of reach of children and other untrained persons.
Tools
are dangerous in the hands of untrained users.
21.
Maintain tools with care. Keep tools clean and bits sharp.
Properly
maintained tools and sharp bits are less likely to bind and are easier
to control. Do not use a damaged tool. Tag damaged tools “Do not use” until
repaired.
22.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using.
Many accidents are caused by poorly main-
tained tools.
SKU 91176
PAGE 4
