background image

ELECTRICAL SAFETY

4.

Grounded adapters/chargers must be plugged into an outlet properly in
stalled and grounded in accordance with all codes and ordinances.  Never
remove the grounding prong or modify the plug in any way.  Do not use any
adapter plugs.  Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded.

  If the Adapter/Charger should

electrically malfunction or break down, grounding provides a low resistance path
to carry electricity away from the user.

5.

Double insulated tools are equipped with a polarized plug (one blade is
wider than the other).  This plug will fit in a polarized outlet only one way.  If
the plug does not fit fully in the outlet, reverse the plug.  If it still does not
fit, contact a  qualified electrician to install a polarized outlet.  Do not
change the plug in any way.

  Double insulation 

 eliminates the need for the

three wire grounded  power cord and grounded power supply system.

6.

Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators.  

There is an increased risk of electric shock if your

body is grounded.

7.

Do not expose power tools to rain or wet conditions.  

Water entering a power

tool will increase the risk of electric shock.

8.

Do not abuse the Power Cord.

  

Never use the Power Cord to carry the tools

or pull the Plug from an outlet.  Keep the Power Cord away from heat, oil,
sharp edges, or moving parts.  Replace damaged Power Cords immedi-
ately.

  Damaged Power Cords increase the risk of electric shock.

9.

When operating a power tool outside, use an outdoor extension cord
marked “W-A” or “W”.  

These extension cords are rated for outdoor use, and

reduce the risk of electric shock.

PERSONAL SAFETY

10.

Stay alert.  Watch what you are doing, and use common sense when oper-
ating a power tool.  Do not use a power tool while tired or under the influ-
ence of drugs, alcohol, or medication.

  A moment of inattention while operat-

ing power tools may result in serious personal injury.

11.

Dress properly.  Do not wear loose clothing or jewelry.  Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.

  Loose

clothes, jewelry, or long hair can be caught in moving parts.

SKU 91176

PAGE  3

Summary of Contents for 91176
















Reviews: