Page 15
For technical questions, please call 1-800-444-3353.
Item 92623
Sanding
1. Make sure that the surface to be sanded is wiped
clean of all dirt and debris, especially that of
previous courser sanding sessions, which will
scratch the surface of a finer grit sanding session.
2. Attach the desired grit Sanding Disk (sold
separately) onto the Backing Pad.
3. Rotate the Speed Dial to select
the desired speed setting.
4. Plug the Power Cord of the Polisher/Sander
into a grounded 120 volt, electrical outlet.
5. To start, grip the Polisher/Sander firmly with both
hands and press the Trigger. Release the Trigger
to stop. To use the Lock on button, while holding
in the Trigger, press the Lock On Button, then
release the Trigger. The Polisher/Sander will stay
on. Press and release the Trigger to stop.
6. Wait until the Polisher/Sander has reached
full speed, then gently contact the surface.
7. Keep heavy pressure off of the Polisher/Sander when
operating. Allow the sanding disk to do the work.
8. Move the Polisher/Sander in a uniform
pattern up and down or side to side as
you sand to ensure even sanding.
9. Periodically, stop the Polisher/Sander and
check for possible disc wear. Replace used
or worn sanding discs when necessary.
10. When finished, turn off and unplug
the Polisher/Sander.
11. Allow the tool to come to a complete
stop before setting it down.
12. To prevent accidents, turn off the tool and
disconnect its power supply after use. Clean, then
store the tool indoors out of children’s reach.
Sa
Fet
Y
Ope
R
ati
O
n
m
aintenan
C
e
Setup
