Manual de Usuario
EXTRACTOR DE GRASA | SQUARE ISLA
Professionale
4
Warning: Failure to install screws or fastening device according to these
instructions may result in electrical hazards.
4. INSTALLATION INSTRUCTIONS
1. Make sure the installation position, fix the hanging scaffold in the correct
position, and check the firmness and smoothness of the installation. You should
leave between 65 and 75 cm between the stove and the hood. See picture 1.
2. Adjust to the proper height, attach the brackets, install on hangers. See picture 2
3. Fix the inside of the chimney on a hanging scaffold, place the chimney outside
on it in the proper position, and insert the hook into the holder to fix the exterior
chimney temporarily. See picture 3.
4. Attach the exhaust air to the vent of the hood body; connect the extension tubing
to the air outlet. See picture 4.
5. Extend the hose off the hanging scaffold; attach the bell body to the bracket.
See picture 5
6. After installation, make sure the extractor is level. Do not hit the glass. See
picture 6
