User Manual
BULIT
– IN GAS STOVE |
LIVORNO 76
Professionale
11
DUAL TRIPLE FLAME VERSION
No gas flow
Maximum gas flow from central burner
Minimum gas flow from central burner.
Gas flow from outside and burner center simultaneously.
Minimum gas flow from outside and burner center simultaneously
BURNER IGNITION
• To obtain a flame, light the burner before placing the utensil on it.
• To light the burner, proceed as follows: For models with integrated light on the control
knob, push fully down and counterclockwise to the maximum flow symbol or press the
button if the appliance is on individual.
• Once the flame is switched on, press and hold the knob for about 10 seconds: This time is
necessary to set the thermocouple (Fig.1 - C) and activate the safety valve; otherwise the
gas flow will be cut off.
• Then check the flame and turn the control knob to adjust the flame to the desired level.
• In the event of a power failure, place a flame near the burner and proceed as described
above.
• If the flame does not come on after several attempts, check that the burner and flame
cover is in the correct position.
• To turn off the flame, turn the control knob clockwise to the symbol.
• Before removing any utensils from the burners, always lower or turn off the flame.
