background image

User Manual 

BUILT-IN OVEN | 

LATINO 60 ELÉCTRICO 

 

 

 

  Never  cover  the  bottom  of  the  oven  with  aluminum  foil,  since  the  consequent 

accumulation of heat could compromise cooking and even damage the enamel. 

  Clean the glass door with a damp cloth and dry it with a soft cloth. 

  Do  not  use  strong  abrasive  cleaners  or  sharp  metal  scrapers  to  clean  the  oven  door 

glass, as they can scratch the surface, which can break the glass. 

 

Replacing the lamp in the oven 

Unplug your oven! 

  Unscrew the glass cover attached to the lamp holder; 

  Unscrew  the  lamp  and  replace  it  with  another  high  temperature  lamp  (300)  with  the 

following characteristics: 

 

  Voltage: 220/240V 

  Power: 15W 

  Socket: E 14 

 
 

  Replace the glass cover and reconnect the appliance to the power supply. 

WARNING:

  Make  sure  the  appliance  is  disconnected  before  replacing  the  lamp  to  avoid  the 

possibility of electric shock. 

Warning:

 Do not operate the appliance with the damaged cord or plug or after a malfunction of 

the  appliance,  or  if  it  has  been  damaged  in  any  way,  return  the  appliance  to  the  nearest 
Authorized Service Center for examination. 

 

 

Protection kit 

During  operation,  the  oven's  glass  door  and  adjacent  parts  of  the  appliance  become  hot. 
Therefore, make sure that children do not touch the device. 

This appliance is not designed to be used by people (including children) with reduced physical, 
sensory  or  mental  abilities  or  lack  of  experience  and  knowledge,  unless  they  have  received 
supervision  or  instructions  on  the  use  of  the  appliance  by  a  person  responsible  for  their 
security. 

Children should be supervised to ensure that they do not play with the device. 

Summary of Contents for Latino 60 Electrico













Reviews: