User manual
FRIDGE | INOX
16
3. CLEANING AND MAINTENANCE
Before cleaning or performing maintenance on the gas hob, disconnect it from the power
source.
To prolong the life of the refrigerator, it is absolutely essential that it be cleaned carefully,
thoroughly and, in general, take into account the following:
x
The enameled parts and the external part should be washed
with warm water without using abrasive powders or corrosive
substances that can ruin them;
x
Glass doors should be cleaned with glass or alcohol, with a
new cloth.
x
The other steel parts can be stained if contact is maintained
with high-concentration calcareous water or corrosive
detergents (containing phosphorus). To prolong the shelf life, we recommend that these
parts be thoroughly rinsed with water and dried by blowing. It is also a good idea to
clean up any spillage.
x
After the refrigerator is being used, the exterior should be
cleaned with a damp cloth to remove dust or food debris.
x
It is suggested to keep the refrigerator once a month;
x
Unplug the power cord to avoid electric shock;
x
Use a damp cloth or neutral detergent (cleaning essence) to
clean
x
Contamination by oil and other dirt. Then thoroughly clean
the detergent.
x
Do not use alkaline detergents, powdered soap, gasoline and alcohol, talcum powder,
etc .; otherwise, coats or plastics may be damaged
x
Regularly clean the body of the refrigerator and clean the dust from the floor to keep the
refrigerator clean.
Inspections after maintenance:
1. If there is damage to the power line and plug;
2. If there is dust on the power plug;
3. If there is abnormal heat in the plug;
4. If the socket is loose;
5. If the plug is fully inserted.
Note:
If the power line and plug are damaged and there are dusts, electric shock or fire may
occur; After disconnecting the plug, it must take 5 minutes before plugging it back in; Do not
put your hands under the refrigerator to avoid hurting yourself.
