User manual
FRIDGE | INOX
13
Bottle rack
Press the child lock lever with your thumb as follows:
1. And the water lever
2. It will be locked to prevent children from controlling it
Disassembly:
Hold both sides of the bottle shelf with both hands.
Push it from the side without the projection and push it in according
to the direction of the arrow. When pressing hard, note that the
buckle on the edge of the bottle shelf is separated from the groove in
the liner. Then the shelf can be removed from the bottle.
Installation:
Hold both sides of the bottle rack with both hands.
Install the buckle on the boss side at first. Then push the other side
slightly inward, the buckle can be fixed.
Press in the opposite direction to unlock and drink water
1. Hold both sides of the tank with your hands and pull the tank
assembly out of the door slightly in the direction shown below.
Notes:
Meanwhile, the transparent silicone parts of the sealed water
valve can be pulled out when removing the water tank. If so, remove
and reinstall them according to the following steps.
1-1. Align the sealed part with the hole in the door and place it on the door.
1-2. It will be completed when the step of the sealed part can be adjusted to
2. Turn counterclockwise to remove the water valve assembly from the
3. Slightly pinch the flange of the water tank cap upward and the water tank cap can be
detached from the water tank. Remove the other side with the same method. The tank and its
lid can.
