10
Funky tool
3. Production of multi-coloured, striped foils
Put unicoloured Drufosoft foils into the
cutting aid one after another and cut
them into 2-9 stripes (in case of several
stripes please pass scalpel / box cutter
along the same cutting line each time).
1
For cutting a hot scalpel or box cutter
are recommended. Assort a foil from the
stripes according to your wishes.
Remove the tension ring from the
Drufomat / Drufosmart and put the unit
adapter into the plate reception.
2
Place the heating pan and the chimney
onto the unit adapter and swivel the
plate reception into the centre of the
unit. At the same time press the plate
reception slightly downwards and direct
the heating into the heating position.
Please observe that the cannelure of
the chimney latches into the the heat-
ing housing.
3
Start a 2 minutes heating programme.
02:00
00:00
bar
psi
1
MAX
2
3
4
5
6
15
30
44
58
73
97
4
