Dreve D-38100, Operating Instructions Manual

Page: 23 / 68

23
7. Operation
Activate the main switch (2) on the back
of the device; the functional display LED
(6) lights up in red. The device is now
ready for operation.
Open the polymerisation chamber by
raising the device cover (12) at the han-
dle (11). The opening angle is approx.
55° and is fixed in its final position by
a magnet. Position the item(s) to be polymerised
on the reflective area (8) of the rotary
plate (7).
Release the cover from its magnetic
anchoring by pulling slightly on the
handle and close the polymerisation
chamber.
7.1 Time programmes
The EyeVolution
®
light-curing device
features several pre-programmed time
relays. Use the push-button (4) to
activate time programmes with 1, 2, 3, 5
and 10 minutes.
Start the selected time programme by
pressing the corresponding push-button
(4). The polymerisation process starts
automatically and is indicated as an
active programme by a green LED.
7.2 Rotary plate
The platform for supporting the model is
designed as a reflective rotary plate (7)
for full and shadow-free polymerisation
wherever possible. The rotary function
is coupled with the time programmes
and is automatically activated when the
polymerisation programme starts. The LED (6) indicates the operating sta-
tus of the rotary plate:
Green LED = rotary plate in action
Red LED = rotary function deactivated
Use the push-button (5) to activate or
deactivate the rotary plate function at
any time, even during on-going poly-
merisation programmes.
deutsch
english
français
español
italiano