Dressmaker 150, Instruction Manual

Page: 9 / 39

Connecting machine to power source
Attention:
Consult a qualified electrician if in doubt as to connect machine to
power source.
Unplug power cord when machine is not in use.
The appliance must be use with the AC adaptor that input 120V AC 60Hz
15W and output 5.2VDC 800mA.
START STOP
Connecting the machine
1. Connect the machine to a power source as illustrated, then light on.
2. Turn on the power switch.
Foot control
With the sewing machine turned off, insert the
foot control plug into its connector on the
sewing machine. Turn on the sewing machine,
and then slowly depress the foot control to
start sewing. Release the foot control to stop
the sewing machine.
3