Inserting the bobbin
A
B
B
When inserting or removing the bobbin, the needle must be fully raised.
1. Open the bobbin cover plate.
2. Insert the bobbin in the bobbin case with the thread running
counterclockwise direction (arrow).
3. Pull the thread through the slit (A).
4. Draw the thread clockwise until it slips into the notch (B). Pull out about 15 cm
(6 inches) of thread.
5. Attach the bobbin cover plate.
Turn power switch to "STOP" before inserting or removing the bobbin.
Attention:
A
1
2
4
3
5
5
Summary of Contents for 150
Page 39: ...021T1A0103 Nov 02 T1 ...
