1-1
April 2003
Part No. 917404-001 Rev. B
1
GETTING STARTED
1.
1.1 Introduction
This manual describes the installation and testing of the Wayne Hyper Peripheral Interface Board
(HyperPIB). The information is this manual is intended to be used by service representatives
installing the system and by maintenance personnel.
For additional information about the Wayne 2400/Plus™ Management Control System (2400/Plus),
refer to the following publication:
•
Operation and Programming, Wayne 2400/Plus Management Control System
,
part number 917434
1.2 HyperPIB Overview
Installing the HyperPIB board, part number 881415-xxx, in the site controller, allows the 2400/Plus
system to communicate with auxiliary controllers (AC). Auxiliary controllers are then able to operate
in place of the Wayne 2400 Control console when controlling Wayne dispensers. Auxiliary
controllers, such as Verifone, Suntronic, Allied or the Datarol 7100™, interface with the 2400/Plus
system with an RS-232 cable installation, part number 887902-001.
1.3 Required Equipment
The following equipment is required to install the HyperPIB board and the interface cable.
