(2)Use Nespresso capsule:
①
Use “N” chamber, put Nespresso capsule into “N” lower chamber. Screw the upper and lower
“N” chamber home tightly.
②
Slide the chamber horizontally into the machine, check chamber is firm position. Place drinking
cup or your cup on drip tray.
Rotate the On-Off switch lever anti-clockwise to
. Machine will Beeps and three lights ON.
The chamber is LOCK and machine is stand by.
③
According to your favorable taste, press control button to choose cup size (big cup/middle
cup/small cup) and start making coffee.
“N” chamber
Put Nespresso capsule
into “N” lower chamber
Upper
and
lower
“N” chamber screw
home tightly.
※The chamber should be
slid to the end of the
groove.
[Attention]
1. If the chamber is not put to correct position (isn’t slide to the end), the chamber cannot
be locked and machine will not turn on.
2. Do not rotate the lever too hard or put to wrong position. This may damage the lever.
[Attention]
Please use genuine Nespresso capsules.
[Attention]
1. During the machine working, in case you notice machine is abnormal (no coffee comes out, leak
water etc.),
please press control button again to stop it. Do not
rotate the On-Off switch lever,
because machine still has residual heat and pressure.
2.
After Every Use, Please Wait One Minute Before Unlock The Chamber Because The Machine Still Has Residual
Heat and Pressure After Use.
