④
After step 3, wait 1 minute. Rotate On-Off switch lever clockwise to
, Take out and screw
out the “D” chamber. Replace the coffee flavor Dolce Gusto capsule in to the chamber and screw
“D” chamber home tightly.
⑤
Slide the chamber horizontally into the machine, check chamber is firm position. Place drinking
cup or your cup on drip tray.
Rotate the On-Off switch lever anti-clockwise to
. Machine will Beeps and three lights ON.
The chamber is LOCK and machine is stand by.
⑥
Press control button to choose small cup size (45ml) and start making coffee.
Put coffee flavor Dolce Gusto capsule into
“D chamber”
[Attention]
1. There is a sharp pin at upper “D” chamber, please be careful.
2. When you screw the “D” chamber, the sharp pin pierce Dolce Gusto capsule, you can hear
“PUFF”. That means the capsule has been pierced successfully. If not, please try to screw home
tightly again.
※The chamber should
be slid to the end of
the groove.
[Attention]
1
If the chamber is not put to correct position (isn
’
t slide to the end), the chamber cannot be
locked and machine will not turn on.
2
Do not rotate the lever too hard or put to wrong position. This may damage the lever.
[Attention]
1.
During the machine working, in case you notice machine is abnormal (no coffee comes out, leak
water etc.),
please press control button again to stop it. Do not
rotate the On-Off switch lever,
because machine still has residual heat and pressure.
2.
After Every Use, Please Wait One Minute Before Unlock The Chamber Because The Machine Still Has Residual
Heat and Pressure After Use.
