DREAMVISION Dreamy geek II, User Manual

Page: 9 / 28

InStaLLatIon guIdeLIneS
R699854 - Dreamy Geek 2 User Manual 9
2.6 Lens Offset, Picture Zoom and Focus
Lens Offset
The optimum image can be obtained when this projector is place perpendicular to the projection screen. The lens
offset is fixed to 50%, that means that the projector can be placed either at the top or at the bottom of the picture
as shown in the below picture.
This unit comes with a vertical offset fixed to +50%. It means that the optimal position of this projector
is at the bottom or top of your screen. Placing the unit in one of these positions prevents the use of
electronic trapezoidal correction and will give the best picture quality.
If the projector is not installed perpendicularly to the screen, use vetical keystone correction to fulfill your screen.
You can also use up to +/- 40° up and down keystone correction. Note that using keystone correction is not
recommended if you want the best image quality.
Picture Focus
Adjust the picture focus with the focus adjustment tab located on the top cabinet of this unit as shown below.
OK
Focus tab
Use the manual focus tab to obtain a sharp picture.
This is important to note that the picture focus should be adjusted only when the projector is warm. Wait
at least 20 minutes after this unit has been powered On to fin adjust the focus.