Turn the metal slat frame
falling upward and
carefully lower the slat
frame into the bed.
Ensure that the frame sits
on the guides located on
the side rails "3".
Position the slat frame so
that the holes in the frame
align with those in the side
rails "3".
Secure the frame to the side
rails "3" by threading bolt
"B" through the holes in the
frame and the side rails "3".
Finally, tighten the bolt "A"
into the sleeve nut "B"
the top of
with allen keys "D".
STEP 7
from
frame with
slats
Dx1
Ax4
Bx4
Dx1
Cx4
10mm
Adjust leg height to suit bed frame
Please note: the center bar
"4" and wooden support
feet "5"can be probably
disposed if choosing
sprung slat frame
