Dreamline UNIDOOR PLUS, Installation Instructions Manual

Page: 56 / 60

© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Troubleshooting
Prior to contacting DreamLine® Customer Service, please
have the following information readily available:
- Purchase Order Information
- Name, PO Number, Dealer/Vendor Name, etc.
- SKU/Model Number (see Page 31)
- Factory Part Information (see Page 31)
TIP
Problem/Symptom Suggested Solution
Page(s)
Missing Parts
•Check all shipping/packaging material for missing parts/components.
•If not found, contact DreamLine Customer Support [1-866-731-2244] to order
factory part replacement.
――
Door Glass does not close
flush with the
180º Strike
Vinyl (#19) and Inline Panel
Glass (#11)
•Inspect the 180º Degree Strike Vinyl (#19) and ensure the orientation of the
vinyl is correct.
•Check that the
180º Degree Strike Vinyl (#19) is installed correctly so the Door
Glass closes flush with the vinyl.
•Check that the reveal between the door and the strike vinyl is consistent/even. Use
a level and adjust the assembly. Removal and re-installation may be necessary.
13;21
Top of Inline Panel Glass
(#11) is not flush with the top
of the Door Glass
• Measure that the height of the Door and Inline Panel Glass is at 72 inches.
• Refer to the Door Manual for proper installation of the door.
――
Leakage: beneath the
Bottom U-Channel (#29)
and Inline Panel (#11)
•Confirm that all screws are tightly secured to the threshold
•Inspect the silicone and ensure that a complete application of silicone
has been applied. Allow 24 hours for the silicone to cure before using the shower.
――
L-Bar™ Support Bracket
(#30)
not installed level with
the Inline Panel Glass
•Review the L-Bar™ Support Bracket (#30) installation steps to adjust the L-Bar.
•Confirm the gaskets are in place to protect the glass
•Removal and re-installation may be necessary
•The L-Bar must be installed correctly for the safety of the installation
23-26
INLINE PANEL (STYLE F) Inline Panel Glass Manual Ver 2 072019 30
©2020 DreamLine® All Rights Reserved