Dreamline Prism DLT-1032320, Installation Instructions Manual

Page: 27 / 32

“PRISM” Ver.1 Rev.3 08/2015
6
3. Apply clear silicone along the inner channel of the
Glass profile (01) and push the Stationary glass (03)
inside the channel.
Slide the
Stationary glass assembly into the groove
of the Wall profile (02) .
NOTE: The small holes on the Stationary glass
should be away from the wall.
NOTE: If you have difficulty sliding the Glass profile
over the Stationary glass, you can slightly tap on the
Glass profile with a rubber mallet and a piece of wood.
Please do not strike directly on the profile or on the
edge of the glass panel.
See Fig. 3 for details.
Fig
. 3
4.
Insert the assembled Stationary glass into the Wall profile (02).
See Fig. 4 and Fig. 5 for details.
Fig
. 4
1
2
3
4
5
6
1
2