Dreamline Prism DLT-1032320, Installation Instructions Manual

Page: 26 / 32

“PRISM” Ver.1 Rev.3 08/2015
5
Shower Enclosure Installation
1.
Draw the line on the wall according to your Shower
Enclosure model size.
Place the
Wall profiles (02) onto the Shower base or
threshold against the finished wall and level it vertically.
See Fig. 1 for details.
Enclosure assembly measurements
：
Fig
. 1
Fig
. 1
2.
Make sure the Wall profile (02) is absolutely vertical.
Mark the drilling holes on the wall through the predrilled
holes in the
Wall profile .
Drill the holes in the wall using Ø 5/16” drill bit and insert
the Wall anchors (08).
Run a bead of Waterproof silicone along the Wall profile.
Fasten the Wall profile to the wall using the Round head
screw ST4.2×40 (11).
See Fig. 2 for details.
Fig
. 2
Measure from the finished corner to the inside edge of wall profile as shown:
Model No. W1 W2
SHEN-GL2101-343410 33 7/16” 33 7/16”
SHEN-GL2101-363610 35 7/16” 35 7/16”
SHEN-GL2101-383810 37 7/16” 37 7/16”
SHEN-GL2101-404010 39 7/16” 39 7/16”
W1
W2
1
2
3
4
5
6