“PRIME” Enclosure Ver.1 Rev.3 12/2015
9
10.
Install the
Handles (06)
onto
the
Glass doors (04).
Press the
Anti-water strips (08)
onto the vertical edges of the
Stationary glass (05)
and both vertical edges of the
Glass doors
(04)
(the shorter strips attach to the panel glass and the longer
strips onto the doors).
Press the
Magnetic strips (07)
onto the vertical edges of both
Glass doors (04)
for a tight seal.
See Fig. 9 for details.
Fig
. 9
11.
Make final adjustments of the assembled unit within the
Wall
profiles (01),
making the unit tight to the walls and tight to the
threshold.
From inside of the shower area, drill 2 holes through the
Wall
Profiles (01)
into the
Glass profiles (02)
using an
Ø 1/8”
drill
bit
.
(one hole at the top and one hole at the bottom)
ATTENTION:
Do not drill the profiles throughout, only through the first
layer of the wall profile and the glass profile.
Secure the
Wall profiles (01)
to the
Glass profiles (02)
using
the
Round head screws ST4.2×10 (12)
and washers (Fig 10.2).
Cover the exposed screw heads with the
Decorative covers
(14).
See Fig. 10 for details.
2
1
3
Ø1/8”
2
1
3
Fig
. 10
door
panel
door
inside
door
Summary of Contents for PRIME 31x31
Page 4: ...2018 DreamLine All Rights Reserved SLIMLINE SHOWER BASE manual Ver 5 Rev 9a 11 2018 3...
Page 5: ...2018 DreamLine All Rights Reserved SLIMLINE SHOWER BASE manual Ver 5 Rev 9a 11 2018 4...
Page 19: ...2018 DreamLine All Rights Reserved SLIMLINE SHOWER BASE manual Ver 5 Rev 9a 11 2018 18 Fig 7b...
