Dreamline Charisma Slimline DLT-1032320, Installation Instructions Manual

Page: 27 / 49

© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools
CHARISMA Shower Door Manual Ver 4 052020 4
©2020 DreamLine
®
All Rights Reserved
To prevent stripping the screw heads, set screw gun clutch to a low setting when
installing screws and bolts.
Pencil
Screwdriver
Phillips
5/16”
(8mm)
Drill bit
Level
Silicone
Mallet
1/8"
(3mm)
Drill bit
3/16"
(5mm)
Drill bit
Driver
Power
Drill
Power
Metal File
Painter’s Tape
Measure
Tape
Unpack your un it carefully and inspect it. Lay it out and identify all parts using the Detailed
Diagram on page 5 ; and packing list in this manual as a reference. Before discarding the
carton, check for small hardware bags that may have fallen to the bottom of the box. If any
parts are damaged or missing, please contact DreamLine
®
for replacement. The shipping
boxes may contain extra parts not used in your model configuration.
Retain these installation instructions for future reference.
NOTE
Verify that the correct model size has been ordered; measure the finished opening
before proceeding with the installation.
TIP
Confirm that the finished walls are plumb and the threshold is level and pitched into the
shower area.
Cover the shower/tub drain with tape prior to installation to prevent the loss of screws
or small parts.
Use a type of drill bit that is appropriate for drilling into the finished surface material.
Use a good quality waterproof, mildew-resistant 100% silicone caulk.
Hack Saw Compound
Miter Saw
OR
Measure the finished opening before proceeding with the installation to be sure that
the correct model size has been ordered.
Prior to installation, cover the shower/tub drain with tape to prevent losing screws or
small parts.